A new HVAC installation usually comes with a checklist: remove the old equipment, set the new system, make the connections, test every component, and leave the homeowner with reliable heating and cooling. On this Summerville, SC project, we had one extra item on the list: earn approval from the homeowner’s dog.
Our technician, Chris, quickly picked up a four-legged “assistant” who stayed interested in the work while our team replaced the home’s existing 2-ton HVAC equipment. The homeowner had contacted our Arctic Air Inc. office for help, and we came prepared to handle the removal, installation, safety upgrades, and final system verification from start to finish.
Removing the Old System and Setting the New Equipment
We began by recovering the refrigerant in accordance with EPA guidelines. From there, we removed the existing 2-ton equipment and disposed of it properly.
The replacement included a new Ruud 2-ton outdoor condenser and a matching Ruud indoor air handler. Once the major equipment was in place, we connected the refrigerant lines, electrical components, and condensate drain system. Every connection needed to support safe, dependable operation, so our work continued well beyond setting the units in position.
Of course, Chris had supervision. The homeowner’s dog had taken a liking to him and seemed ready to join our crew for the day.
“This Summerville HVAC replacement came with a new Ruud system and one very dedicated four-legged supervisor.”
Building Safety and Protection Into the Installation
A complete replacement also gave us the opportunity to install several supporting components. We added two HVAC surge protectors, a new programmable thermostat, two water safety switches, and a secondary condensate drain pan.
Outside, we installed a new electrical disconnect, electrical whip, condenser equipment pad, and hurricane strapping for the outdoor unit. Inside, we added the air handler support system needed for the new equipment.
These details matter because an HVAC system depends on more than the condenser and air handler. Electrical protection, drainage safeguards, stable support, and secure mounting all contribute to the finished installation.
“For this Summerville home, we paired the new 2-ton Ruud equipment with the electrical, drainage, and safety upgrades needed for a complete installation.”
Testing the New HVAC System Before We Wrapped Up
After installation, we moved into startup and verification. We checked the refrigerant charge and airflow, tested heating and cooling operation, confirmed the programmable thermostat was functioning, and inspected the electrical and safety devices.
We also verified proper condensate drainage and tested the safety switches. Finally, we started and tested the system to confirm it was operating correctly and meeting manufacturer specifications.
The homeowner was very pleased with the new system and shared positive feedback on Chris and his work. We were glad to deliver a finished installation that met the homeowner’s needs, with a little extra help from the jobsite’s most enthusiastic supervisor.
Need a New HVAC System in Summerville, SC?
If your current equipment is ready for replacement, our team can help you plan the next step.
Request a service or schedule an HVAC visit in Summerville, SC so we can evaluate your home, discuss replacement options, and help you move toward dependable heating and cooling with the right supporting safety components in place.
